32 -
ORDINARY MAINTENANCE
COROB™ D800 HD
7.4 External cleaning
WARNING
NEVER USE WATER OR SOLVENT-BASED CLEANING PRODUCTS TO CLEAN THE MACHINE.
In case the colorant has poured inside the machine, do not try to clean; turn the machine off at once and
contact an authorized service center.
In case of paint spills, clean the machine
immediately.
1.
Clean coverings, panels and control devices of
2.
the machine, to remove dirt, dust and any colo-
rant stains, using a soft and dry cloth, or slightly
moistened with a mild cleansing solution.
Connect power supply and switch on the ma-
3.
See the manufacturer manual for instructions on
cleaning the computer.
7.5 Cleaning the nozzle center
Open the Autocap...
1.
I
using the command
in the management
software.
II
bringing the ma-
chine to the off-
line 2 condition,
by means of the
off-line button.
2.
Accurately clean the nozzles using a sharp tool;
3.
remove any dried colorant residue delicately, to
avoid damaging the ends of the circuits.
Connect power supply and switch on the ma-
4.
Close the Autocap...
5.
I
it closes automatically
during initialization.
II
bringing the ma-
chine to the on-
line condition, by
means of the off-
line button.
Carry out Purge, using the command in the man-
6.
agement software.
