Page of 44
26
START. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to
confirm your selection.
3.8
ARC FORCE
3.8.1
Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to exit the
Amperage Adjustment Mode.
3.8.2
Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to ARC FORCE.
Press to confirm.
3.8.3
Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to adjust the ARC
FORCE. Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to
confirm your selection.
3.9
VRD
– VOLTAGE REDUCTION DEVICE
3.9.1
This unit can be set up as a voltage reduction device (VRD) if needed. VRD
reduces the Open Circuit Voltage (OCV) that is available at the weld output
connectors, while not welding.
3.9.2
Press the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to exit the
Amperage Adjustment Mode.
3.9.3
Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to VRD. Press to
confirm.
3.9.3.1 Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB
to turn VRD On or Off. Push in the MULTI-FUNCTION
ADJUSTMENT/SELECTION KNOB to confirm your selection.
3.9.3.2 The screen will automatically default back to your set-up screen.
4. DC LIFT START TIG WELDING SET-UP
4.1
Press the START BUTTON
4.2
Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB until the LIFT TIG
screen is displayed.
4.3
Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB to confirm your
selection.
4.4
Follow the display set-up
4.4.1
Connect the TIG torch to the Negative (-) Weld Output Connection
4.4.2
Connect the Ground Cable to the Positive (+) Weld Output Connection
4.5
Push in the MULTI-FUNCTION ADJUSTMENT/SELECTION KNOB.
4.6
This machine is now set to weld.
4.7
AMPERAGE Adjustment: Turn the MULTI-FUNCTION ADJUSTMENT/SELECTION
KNOB.
4.7.1.1 Counterclockwise to decrease amperage
4.7.1.2
Clockwise to increase amperage
4.7.1.2.1
Note that you will only be able to adjust the amperage to
within the available welding range. Keep in mind that this
amperage range is different when using 120V power and
230V power.
