CTGPL
4 8/4/14
Routine Maintenance
Battery Pack-Once in every three months, remove the
battery pack from the work light and visually inspect
for signs of gas or chemical leakage. If any signs are
observed the battery pack should be removed from
service to prevent chemical damage to inside the work
light.
• Remove dirt and grease as soon as it accumulates.
Use a soft, damp cloth and a mild soap.
•
NEVER
submerge any part of the light in any solution
to clean it.
•
Do NoT usE
solvents such as gasoline, turpentine,
etc. to clean the unit.
Mounting the charger
AC and DC power cords are available. To charge the
work light, switch off and insert the charge plug firmly
into the work light receptacle. Connect the charger to an
appropriate power source.
AC Charging Adaptor
Connect the adaptor cord to the work light charging
receptacle, only with the AC power source in the
“OFF” position. Otherwise, it may result in the damage
of the recharging system. Refer to specifications for
details regarding charging time. There is indicator on AC
charger. When the indicator changes from red to green,
pull the charger plug out and store properly.
Installing the DC Option
The DC Adaptor is offered as an option for those who like
to mount 26 LED Pivot Work Light system in their vehicles.
When installing or using the 26 LED Pivot Work Light in a
vehicle, always make sure that the work light case does
not touch the chassis. This can result in damage to the
work light.
Plug the DC power cord Adaptor into the cigarette lighter
receptacle of the vehicle. Do not leave adaptor plugged
in for any extended period while engine is “OFF” to avoid
draining battery.
Operation
1. Depress the upper switch for work light
2. Depress the lower switch for base light
Warranty
LIMITED 12-MONTH WARRANTY
Cornwell Tools warrants to the original purchaser that the company’s 26 LED Pivot Work Light are free from defects in
material or workmanship during the one year warranty period. We will replace any 26 LED Pivot Work Light which fails to
give satisfactory service due to defective workmanship or materials for 12 months from the date of original purchase.
Products must be returned with proof of purchase, to an authorized Cornwell dealer.
This warranty excludes 26 LED Pivot Work Light which have been subjected to abnormal use, accident, neglect, or lack of
maintenance. Any modification, disassembly of this 26 LED Pivot Work Light or repair by an unauthorized service center will
void the warranty.
This warranty gives you specific rights. You may also have other rights which vary from state to state.
The foregoing obligation is Cornwell Tools' sole liability under this or any implied warranty and under no circumstances shall
Cornwell Tools be liable for any incidental or consequential damages.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation
or exclusion may not apply to you.
