SCRN-530 Hardware Installation Guide | DOC-SCRN-530-HIG | 21 July, 2021 | Page 15
NOTE:
Put pressure on the radio node when tightening the captive securing screw.
Figure 10
shows how to attach the wall-mount bracket to the ceiling-mount bracket.
Figure 10 Attaching the SCRN-530 with Ceiling-Mount Bracket to the
Wall-Mount Bracket
Step 5
Make sure that both of the captive securing screws are tightened.
9. Cabling Guidelines
Incorrectly cabling the SCRN
-
530 can result in crushed cables and loss of
communications to the radio node. Follow these guidelines when cabling the
SCRN
-
530:
• Make sure that the cabling is properly routed and dressed.
• When mounting the radio node vertically, orient the bracket so that the
bracket keyholes have the wide side up as shown in
Figure 3
.
• Make sure that the radio node is fully secured to the mounting brackets so
that it locks into place. A correctly-installed cable should at no time during
installation impede inserting the radio node into the mounting brackets.
1
2
