Standard Recommended Procedure 206-455-AEN | Issue 1 | November 2018 | Page 14 of 14
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm
Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications products without
prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are
the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2018 Corning Optical Communications. All rights reserved.
For large strength members (greater than 3mm in diameter)
Step 1:
Use the supplied strain-relief kit, instead of the restraint caps
.
Step 2:
Slide the metal tube over the end of the central
member.
Step 3:
Align the threads in the side of the tube with the
hole in the strain-relief bracket.
Step 4:
Install the supplied screw through the bracket and
the threaded hole in the tube and tighten .
TPA-5996
Figure 32
