CORNING MA2000 Cabinet Installation And Configuration Manual Download Page 20

Page: 20 / 72

MA2000 System Elements

Enclosure Types

MA2000 Installation and Configuration Guide

2.1 Enclosure Types

This section describes both types of enclosures (Cabinet/Lite) and their external connections.

2.1.1

MA2000 Remote Cabinet

Figure

2-1. MA2000 MRC Closed Cabinet View

MA2000 Cabinet supports the following functions:

•

Compactly houses up to five MA2000 RHU and MA1200 modules and the required filters

NOTE:

The number of modules that can be housed depends on the models, required filtering, etc.

•

MA850/MA860 can be connected externally

•

Converges all voice services and provides a single interface to the antennas through external

connections

•

Wall mounted or rack mounted

•

Supplied in two models with differing power supply:

•

Integrated power supply – fed from an external AC power source. The MA2000 RHU an

MA1200 Add-on modules are internally connected to the power supply. This model

includes a battery connection as well.

•

External power supplies – power is routed to external connectors from which power is

routed internally to each MA2000 RHU and MA1200 Add-On module.

Summary of Contents for MA2000 Cabinet









































































Search results

Summary of Contents for MA2000 Cabinet

Reviews:

Related manuals for MA2000 Cabinet

Brands by name

Popular brands

CORNING MA2000 Cabinet, Installation And Configuration Manual

Search results

Summary of Contents for MA2000 Cabinet

Reviews:

Related manuals for MA2000 Cabinet

Brands by name

Popular brands