5
4
Limited Warranty
Corning Incorporated (Corning) warrants that this product will be free from
defects in material and workmanship for a period of two (2) years from
date of purchase. CORNING DISCLAIMS ALL OTHER WARRANTIES WHETHER
EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. Corning’s
sole obligation shall be to repair or replace, at its option, any product or
part thereof that proves defective in material or workmanship within
the warranty period, provided the purchaser notifies Corning of any such
defect. Corning is not liable for any incidental or consequential damages,
commercial loss or any other damages from the use of this product.
This warranty is valid only if the product is used for its intended purpose
and within the guidelines specified in the supplied instruction manual.
This warranty does not cover damage caused by accident, neglect, misuse,
improper service, natural forces or other causes not arising from defects
in original material or workmanship. This warranty does not cover motor
brushes, fuses, light bulbs, batteries or damage to paint or finish. Claims for
transit damage should be filed with the transportation carrier.
In the event this product fails within the specified period of time because
of a defect in material or workmanship, contact Corning’s Customer Service
at the following numbers: USA: 1.800.492.1110; Canada: 1.978.442.2200.
For other regions of the world, visit www.corning.com/lifesciences or see
the included instruction manual for a list of Worldwide Support Offices.
Corning’s Customer Service team will help arrange local service where
available or coordinate a return authorization number and shipping
instructions. Products received without proper authorization will be
returned. All items returned for service should be sent postage prepaid
in the original packaging or other suitable carton, padded to avoid
damage. Corning will not be responsible for damage incurred by improper
packaging. Corning may elect for onsite service for larger equipment.
Some states do not allow limitation on the length of implied warranties
or the exclusion or limitation of incidental or consequential damages. This
warranty gives you specific legal rights. You may have other rights which
vary from state to state.
No individual may accept for, or on behalf of Corning, any other obligation
of liability, or extend the period of this warranty.
For your reference, make a note of the serial and model number, date of
purchase, and supplier here.
Serial No. ___________________________ Date Purchased _____________________
Model No. _______________________________________________________________
Supplier _________________________________________________________________
Specifications
Dimensions (LxWxH)
6.8 x 5.8 x 4.8 in. (17.4 x 14.8 x 12.2 cm)
Weight
2.43 lbs./1.1 kg
Electrical
AC 110-240V, 50/60 Hz, 0.35 A
Unit Input
24VDC 1A
Speed
6,000 rpm
RCF
2,000 x g
Environmental Conditions
◗
◗
Indoor use only
◗
◗
Altitude up to 2,000 m
◗
◗
Temperature 5°C to 40°C
◗
◗
Maximum relative humidity 80% for temperature up to 30°C decreasing
linearly to 50% relative humidity at 40°C
◗
◗
Pollution degree 2
Spare Parts
Cat. No.
Description
6770-RT
Rotor, holds 8 x 1.5/2.0 mL tubes
6770-RTS
Rotor, holds 4 x 8 strip tubes
6770-RTA.20
Adapter, 0.20 for rotor (Cat. No. 6770-RT)
6770-RTA.25
Adapter, 0.25 for rotor (Cat. No. 6770-RT)
6770-RTA.5
Adapter, 0.5 for rotor (Cat. No. 6770-RT)
401025
Power Adapter, 24V
Symbols and Conventions
The following chart is an illustrated glossary of the symbols that may be
used in this manual or on the product.
The electrical warning indicates the presence of a potential
hazard which could result in electrical shock.
CAUTION
This symbol refers you to important operating
and maintenance (servicing) instructions within the product
Instruction Manual. Failure to heed this information may present
a risk of damage or injury to persons or equipment.
This symbol identifies a Protective Earth (PE) terminal, which is
provided for connection of the supply system’s protective earth
(green or green/yellow) conductor.
Equipment Disposal – European Regulations
According to Directive 2012/19/EU of the European Parliament and of the
Council of 4 July 2012 on waste electrical and electronic equipment (WEEE),
Corning® LSE™ Mini Microcentrifuge (Model No. 6770) is marked with the
crossed-out wheeled bin and must not be disposed of with domestic waste.
Consequently, the buyer shall follow the instructions for reuse and
recycling of waste electronic and electrical equipment (WEEE) provided
with the products and available at www.corning.com/weee.
