background image

Register your product warranty online at www.corning.com/lifesciences/warranty

For a listing of trademarks, visit www.corning.com/clstrademarks. All other trademarks are the property of their respective owners.

For more specific information on claims, visit the Certificates page at www.corning.com/lifesciences
Warranty/Disclaimer:

 Unless otherwise specified, all products are for research use only. Not intended 

for use in diagnostic or therapeutic procedures. Corning Life Sciences makes no claims regarding the 
performance of these products for clinical or diagnostic applications.

For additional product or technical information, visit www.corning.com/lifesciences or 
call 800.492.1110. Outside the United States, call +1.978.442.2200 or contact your local 
Corning sales office.

© 

2018 

Corning Incorporated. All 

righ

ts 

reser

ved. 

  5/18 

  CLS-AN-498/11319-30544

Corning Incorporated

Life Sciences

836 North St. 
Building 300, Suite 3401 
Tewksbury, MA 01876
t 800.492.1110 
t 978.442.2200 
f 978.442.2476
www.corning.com/lifesciences

A S I A / P A C I F I C
Australia/New Zealand
t 61 427286832
China
t 86 21 3338 4338
f 86 21 3338 4300
India

 

t 91 124 4604000
f 91 124 4604099 
Japan
t 81 3-3586 1996 
f 81 3-3586 1291
Korea
t 82 2-796-9500 
f 82 2-796-9300
Singapore
t 65 6572-9740 
f 65 6861-2913
Taiwan
t 886 2-2716-0338 
f 886 2-2516-7500

E U R O P E
[email protected]
France
t 0800 916 882
f 0800 918 636
Germany
t 0800 101 1153 
f 0800 101 2427
The Netherlands 
t 020 655 79 28
f 020 659 76 73
United Kingdom
t 0800 376 8660
f 0800 279 1117
All Other European  

Countries
t +31 (0) 206 59 60 51 
f +31 (0) 206 59 76 73

L A T I N   A M E R I C A
[email protected]
Brasil
t 55 (11) 3089-7400
Mexico
t (52-81) 8158-8400

Summary of Contents for LSE 6709










Reviews: