P/N 003-809
Issue 7
Standard Recommended Procedure 003-809 | Issue 7 | May 2017 | Page 1 of 6
EDGE
™
Rackless Mounting Kits
related literature | Search www.corning.com/opcomm. Click on “Resources.”
003-794
EDGE
™
Solution
1.
General
This document describes installation of the EDGE™ housings onto an overhead wire tray using mounting kit EDGE-
BKT-WT-2RU and EDGE-BKT-WT-4RU respectively or into a ladder rack using mounting kit EDGE-BKT-LR-2RU or
EDGE-BKT-LR-4RU.
2.
Carton Contents
Use the part numbers below to determine the carton contents for your installation.
2.1
Wire Tray Mounting Kit 2U (EDGE-BKT-WT-2RU)
•
(1) Bottom plate and (2) support bars preinstalled
•
Hardware kit containing:
•
(2) Omega bracket, horizontal position
•
(2) Omega bracket, vertical position
•
(8) 10-32 x .5 stainless-steel screw
•
(8) Split lock stainless-steel washer
•
(4) 4-40 x .125 stainless-steel screw
2.2
Wire Tray Mounting Kit 4U (EDGE-BKT-WT-4RU)
•
(1) Bottom plate and (2) support bars preinstalled
•
Hardware kit containing:
•
(2) Omega bracket, horizontal position
•
(2) Omega bracket, vertical position
•
(8) 10-32 x .5 stainless-steel screw
•
(8) Split lock stainless-steel washer
2.3
Ladder Rack Mounting Kit (EDGE-BKT-LR-2RU)
•
(1) Bottom plate / (2) omega brackets and (2) support
bars preinstalled
TPA-5829
TPA-5830
TPA-5831
