Standard Recommended Procedure 003-809 | Issue 7 | May 2017 | Page 6 of 6
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
800-743-2675 • FAX: 828-325-5060 • International: +1-828-901-5000 • www.corning.com/opcomm
Corning Optical Communications reserves the right to improve, enhance, and modify the features and specifications of Corning Optical Communications products without
prior notification. A complete listing of the trademarks of Corning Optical Communications is available at www.corning.com/opcomm/trademarks. All other trademarks are
the properties of their respective owners. Corning Optical Communications is ISO 9001 certified. © 2009, 2017 Corning Optical Communications. All rights reserved.
Step 4:
Then route trunks inside the housing through the brushed cable entry slots. Terminate the MTP
connector at the back of the LC module or MTP adapter panel.
NOTE:
In some cases, variations in the length of the trunk leg make it necessary to mount the trunk cradle
further out on the CDF bracket closer to the cable entry slot to avoid pulling on the leg when accessing the
tray from the front side of the housing.
Figure 6
Figure 7
TPA-5837
2
2
Single cradle
Double cradle
Mount cradle
TPA-5838
