INSTALLATION INSTRUCTIONS
1 1/2 HOUR FIRE RATED LAMINATED
COUNTERTOP INSTALLATION
ES 10-234
REVISION:
#0002
ECO# 1558
BY:
JD
DATE:
10/23/2012
Note:
The details shown below illustrate standard countertop configurations. When projections beyond either
side of the wall exceed
6” additional support must be supplied beneath the countertop by others.
Before permanently installing the countertop into the opening it is advisable to check it for proper fit.
Unpack the countertop from the shipping crate and lay it on a clean flat surface. Be careful to properly
support countertops in the center when lifting to prevent cracking especially if they are long and narrow.
Measure the opening size and check this dimension against the drawings provided and the actual size of
NO CLIP ANGLES
SUPPLIED THIS SIDE
SUPPORT ANGLES SUPPLIED
ONLY WHEN THIS DIMENSION
EXCEEDS 6"
SUPPORT ANGLES
ALWAYS SUPPLIED
THIS SIDE OF
COUNTERTOP
COIL SIDE
PUBLIC SIDE
COIL SIDE
PUBLIC SIDE
APPLY RTV FLAME
RETARDANT SILICONE
SEALANT TO THIS SURFACE
PRIOR TO INSTALLING
COUNTERTOP
APPLY RTV FLAME
RETARDANT SILICONE
SEALANT TO THIS SURFACE
PRIOR TO INSTALLING
COUNTERTOP
4'-0" MAX.
6" MIN.
FOR UNITS THAT EXTEND LESS
THAN 6" TO FLUSH WITH THE WALL
ON THE PUBLIC SIDE.
1 5/8"
4'-0" MAX.
6" MIN.
4" STD.
STANDARD UNIT CONFIGURATION
