background image

 

 
 
1.  Thank you for your purchase of this appliance. Read all instructions carefully.   

Keep this user manual for future reference. 

2.  Always switch off and unplug the appliance from the electrical outlet 

BEFORE

 cleaning   

and also when not in use. 

3.  Never immerse the appliance, power cord or plug into water or other liquids. Please refer 

to the section on “Care and Cleaning”. 

4.  This product must not be left unattended while it is connected to the mains supply. 

5.  If it is a detachable power cord, always connect the power cord to the appliance   

first 

BEFORE

 plugging it into the electrical outlet. To disconnect the appliance, switch off 

the power on the electrical outlet before removing the power plug. 

6.  Close supervision is necessary when operating the appliance near children. Ensure that 

the power cord does not hang over the work surface. 

7.  Do not operate the appliance with a damaged power cord set or plug. Any repairs   

should always be carried out by an authorized service centre. 

8.  During usage, it is forbidden to remove the steam pipe. 

9.  To avoid damaging the heating element, do not turn ON the power supply before filling the 

water tank.

 

 

10. Do not use the appliance for any purposes other than its intended use. This appliance 

is intended for household use only. 

11. Do not use the appliance in the outdoors

 

or in a damp area. 

12. Do not place heavy items on the power cord, allow it to be pinched between objects,   

or modify it. 

13. Do not place the appliance on or near a hot gas or electric burner, or near easily   

flammable materials. 

14. This appliance should not be used by people who are physically or mentally 

impaired (including children) unless proper guidance is provided during operation.

 

 
 

 

 
 
 

GENERAL SAFETY PRECAUTIONS 

Summary of Contents for CGS-EL238H









Reviews: