background image

 

SFV-1™ Owner’s Manual

© 2005-2021, Marmon Foodservice Technologies, Inc.

- 5 -

Publication Number: 620608761OPR

OPERATION

SFV-1™ D

ISPENSING

 V

ALVE

SFV-1™ Electric Dispensing Valve

1.

Press cup or glass against dispensing valve lever and dispense product 
until cup or glass is full. Then release lever.

Figure 7.

Optional Water Lever

1.

If water only is desired, place cup under a dispensing valve with the 
water lever. Press down on the water lever to dispense. Then release 
lever to stop dispensing.

NOTE: The water lever is an optional item. The water lever is available 

as a kit, refer to Illustrated Parts List for part number.

Optional Illuminated Cover

1.

The downward lighting can be turned off by removing the access bush-
ing on the back of the light module and changing the position of the 
selector switch.

NOTE: The Illuminated cover is an optional item.

Refer to the illustrated part list for the kit number.

   

Figure 8.

SFV-1™ Dispensing Valve With Self-serve Dispense 
Switch

1.

Place cup or glass under dispensing valve nozzle.

2.

Press and hold the dispense switch until the cup or glass is full. Then 
release the switch.

Figure 9.

Summary of Contents for SFV1














Reviews: