Quest Elite 4000 Service Manual
© 2010-2014, Cornelius Inc.
- 19 -
Publication Number: 620048956SER
Cleaning the Cabinet
The cabinet bottom surface and walls should be inspected and cleaned annually
according to the following steps:
1.
Remove natural rubber nozzle bushing gasket (see Figure 17) and inspect it
and silicone RTV. If cracked, clean off RTV, and re-apply using kit P/N
729011013 per instructions provided with kit.
2.
Re-apply nozzle bushing gasket so that the edges lie flat on the floor of the
cabinet.
Figure 17. Nozzle bushing gaskets - proper installation
3.
Clean cabinet floor and walls of any spilled juice and let dry. Use a mild
soap/detergent and plain water.
4.
Reinstall the pump platform in the reverse order given above.
