Quest Elite 2000 Installation Manual
© 2010-2012, IMI Cornelius Inc.
- 5 -
Publication Number: 620048922INS
Recommended Clearance
12” (30.48 cm) on top and 4” (10.16 cm) required in back for air circulation and
4” at the sides of the unit.
Electrical Connection
6 ft. long (1.83 m) power cord with 3-prong plug attached to dispenser. Export
models are shipped with a European plug. The plug is accessible after
installation.
CAUTION:
!
Only trained and certified electrical technicians should replace the power cord or
the unit should be returned to an Authorized Service Center for power cord
replacement.” The replacement cord must meet all requirements of the original
equipment manufacturer.
Failure to comply could result in serious injury, death or damage to the
equipment.
Power Supply
15 amps at 120 volts dedicated power supply.
10 amps at 230 volts dedicated power supply.
Water Connection
3/8 in. (0.95 cm) SAE male flare fitting on dispenser (Figure 2).
Figure 2. Water Connection
Water
Connection
