FCB Pinnacle 2 and 4 Flavor Installation Manual
© 2003-2014, Cornelius Inc.
- 3 -
Publication Number: 560007295INS
Environmental Requirements
Ambient (room) temperature must not exceed 90
F. Temperatures in excess of 90
F will void the factory warranty
and may eventually result in refrigeration system failure. If the unit is powered up while it is over 120
F, the unit will
not function. Call Service.
If the inside cabinet temperature is over 120
F, let the temperature cool to 100
F before continuing the install.
CAUTION
:
!
There must be proper clearance on all sides and on top of the unit to avoid overheating and damaging the unit and
voiding the warranty.
CAUTION
:
!
This unit is designed for indoor installation only (in a non-harsh environment). See the Requirements Summary for
this information.
CAUTION
:
!
The
water in the unit will freeze and may damage the unit if the unit is exposed to freezing temperature.
D
ELIVERY
I
NSPECTION
AND
U
NPACKING
Inspection
Inspect the unit for damage or irregularities upon delivery. Immediately report problems to the delivering carrier and
file a claim with that carrier.
Unpacking
1.
Remove 4 bolts and strapping from the crate. Remove staples and lift the carton off of the pallet.
Figure 1.
2.
Remove packing fillers from top of the unit.
3.
Open the packages of loose parts and inspect all of the parts. The Magnet Puller Tool is P/N 560003662
(stored at the inside base of the frame).
Remove
Bolts
Summary of Contents for FCB Pinnacle 2 Flavor
Page 23: ......
