Repairs
Cornelius Deutschland GmbH
Document no. TD0004100
Version 01/07/2019, Index 1
Installation and service manual Tower
Nueva Style
25
7.12
Replacing the dispensing valve support
NOTICE!
Multiple dispensing valve support variants are available for the unit. Replacing the dispensing valve support is
identical for all variants and is described here using an example.
Finishing tasks
1. Install the soda dispenser (optional), if required; see chapter 7.11.
Prerequisites
References
The soda dispenser (optional) has been removed.
see chapter 7.11
Spare parts
ID/reference
Qty/amount
Comment
Dispensing valve support
220115050
1
5 dispensing valves
Dispensing valve support
220115051
1
6 dispensing valves
Dispensing valve support
220115053
1
8 dispensing valves
Insulation, small
220107476
1
5 dispensing valves
Insulation, small
220107474
1
6 dispensing valves
Insulation, small
220107478
1
8 dispensing valves
Insulation, large
220107477
1
5 dispensing valves
Insulation, large
220107475
1
6 dispensing valves
Insulation, large
220107479
1
8 dispensing valves
1. Remove the syrup tubes (Fig. 53/2) from the dispensing valve support (Fig. 53/1).
Only for units without a soda dispenser:
Remove the soda tubes from the dispensing valve
support.
Fig. 53
1
2
2. Remove the fastening bolts (Fig. 54/3) from the dispensing valve support (Fig. 54/1).
3. Lift and remove the dispensing valve support (Fig. 54/1) from the stand (Fig. 54/2) in an up-
ward motion.
4. Insulate the new dispensing valve support using the small and large insulation.
5. Position the dispensing valve support (Fig. 54/1) on the stand (Fig. 54/2).
6. Attach the dispensing valve support (Fig. 54/1) using the fastening bolts (Fig. 54/3).
7. Position the syrup tubes (Fig. 53/2) within the dispensing valve support (Fig. 53/1).
Only for units without a soda dispenser:
Position the soda tubes within the dispensing valve
support.
Fig. 54
1
3
2
