6
Installation Guide
Corinex HD200 Powerline Wall Mount F
2
Installation Guide
2.1 What this Package Contains
When you receive your
Corinex HD200 Powerline Wall Mount F
, check to be sure
that your package contains:
•
Corinex HD200 Powerline Wall Mount F
(2 for dual pack)
• Standard Ethernet cable (2 for dual pack)
• CD with documentation
We are constantly innovating our products. For the latest hardware/software
changes, downloads, and additional information on your device, please visit
www.corinex.com.
2.2 System Requirements
In order to follow the procedures described in this document, it is recommended
to have a PC equipped with a fast ethernet network card and running MS Windows
2000 or later version. The computer must have one static IP assigned to its network
interface.
2.3 Recommended Software
Certain tools are required to configure and access the HD200 Powerline Wall
Mount F (also referred to as a modem). All these tools are available for Windows. In
order to reduce the learning curve for these tools, the configuration process will be
described here primarily for Windows-based tools.
Note:
Corinex provides also a complete network management software
suite called PowerNet allowing installation, configuration and monitoring of a
BPL network. For more information please visit:
www.corinex.com/nms-software.html
The following tools can be downloaded and used free of charge:
•
Win Pcap
is a packet capture library required by Wireshark to sniff the packets
arriving at the Ethernet port. It can be downloaded from:
http://www.winpcap.org/
•
Wireshark
is a graphical packet capture tool used to inspect the traffic
generated by the modem. It can be downloaded from:
http://www.wireshark.org/download.html
•
HaneWin DHCP / TFTP server.
This is an easy to use DHCP + TFTP server
all-in-one tool. It is very useful for configuring the modem at start-up. It can
be downloaded from:
http://home.foni.net/~hanewin
Network Deployment Management System
Helvetica Neue LT Std BdCn
