17
Corinex HD200 Powerline Wall Mount F
Configuring the DHCP / TFTP Server
Figure 7: Other tab
Now repeat the same steps to create the Slave profile. The only difference is the
name of the auto-configuration file under extension 18; it must be “Slave.conf”.
Once you have the profiles, you can proceed to assign a profile to each of your
modems. This assignment is made based on the MAC address. Choose one of your
modems to be the Master, and the rest will be Slaves.
In the main window of the HaneWin server, click the button labeled, “
New
” in the
lower button bar. A new window will open, as shown in figure 8.
In this window, you must enter the MAC address of the modem, the IP address that
you want assigned to this modem, and the configuration profile. When you click
OK
,
it will create an entry in the static leases list.
5. In the tab, “
Other
”, select option
18
and type in the name of the
Master configuration file (e.g. “Master.conf”). Then click “
Add
” to
add this option.
6. In the same tab, add option
120
with binary value “
0 0 0 0
”.
