Corghi SP 2300, Operator'S Manual

Page: 34 / 104

34
SP 2300
- Operator’s spare parts
NOTE: stop rotation when the bead depressor
is near the mounting/demounting tool.
- Press the lift lever, release the wheel from the
roller and bead depressor.
APPROVED M/D
PROCEDURE FOR UHP
AND RUN FLAT TYRES
For the detailed M/D procedure for UHP and
RUN FLAT tyres, please refer to the instruction
manual wrote by WDK (German Association of
the Tyre Industry)
MAINTENANCE
WARNING
The producer declines all liability for claims
deriving from the use of non-original spares
or accessories.
WARNING
Before making any adjustments or carrying out
maintenance, disconnect the electrical supply
from the machine and make sure that all moving
parts are suitable immobilised.
WARNING
Do not remove or modify any parts of this ma-
chine except in the case of service interventions.
DANGER
Before carrying out any maintenance operation
or topping up with lubricant, disconnect the
machine from the compressed air supply line.
ATTENTION
Keep the work area clean.
Do not clean the machine with compressed air
or jets of water.
When cleaning the area avoid raising dust as
far as possible.