Corghi HD 900, Operator'S Manual

Page: 46 / 182

46 - E
nglIsh
- Operator's manual HD 900
NOTE.
The machine may also be used for tyre groov-
ing. Operate the turntable intermittently for
this operation.
WARNING
Always check that the tyre size is compatible
with the rim size prior to assembly.
CAUTION
Do not clean or wash the wheels mounted on the
machine with compressed air or jets of water.
DANGER WARNING
DECALS
NEVER insert hands, arms or anything else inside
the turntable while it is opening or closing.
While the turntable is being lowered, both with
a mounted wheel or with the turntable open,
maintain a safe distance to prevent crushing.
NEVER come between the tool unit and the rim
or locked wheel on the turntable.
Keep a safe distance when the tool unit is tilting
to prevent crushing.
For safety reasons, never leave the wheel locked
on the turntable during work breaks.
Before continuing, always check that the tool
holder arm ratchets are correctly hooked to
the carriage.
If replacing the tool unit, pay attention during
insertion to keep your hands from being
crushed.
Do not open the control unit door before
disconnecting the tyre changer from the
mains.