Corghi HD 1300, Operator'S Manual

Page: 67 / 304

HD 1300 / HD 1300 A Operator Manual 67
EN
INTRODUCTION
The purpose of this manual is to provide the instructions necessary for optimum operation,
use and maintenance of your machine. If the machine is resold, provide this manual to
the new owner. Furthermore, ask the new owner to fill out the ownership transfer module
attached to the previous page in the manual and send it to CORGHI, so that CORGHI will
be able to provide the customer with all necessary safety information. Alternatively, the
new owner can inform Corghi by sending an email to service@CORGHI.com.
This manual assumes that the technicians are in possession of all the knowledge neces-
sary for the identification and maintenance of rims and tyres. Technicians must also have
a thorough knowledge of the functions and safety characteristics of all the specific tools
used (such as the rack, lift or jack), and a sufficient understanding of all manual or electric
tools necessary to be able to work in safety.
The first section provides basic information about safe operation of the HD1300 tyre changer
family. The following sections of this manual contain detailed information regarding the
equipment, operating procedures and maintenance. Italics is used to refer to specific
parts of this manual that offer additional information or clarifications.
These references must be read in order to obtain additional information about the in-
structions.
The owner of the tyre changer is the only person responsible for the observance of the
safety procedures and the organisation of technical training. The tyre changer must only
be used by qualified, specifically trained technicians. The owner or management is
exclusively responsible for storing the documentation relative to qualified personnel.
The HD1300 family of tyre changers has been created for the mounting and demount-
ing of industrial vehicle tyres (trucks, buses, tractors and earth moving vehicles) with a
maximum external diameter of 2200 mm and a maximum width of 1300 mm.
Additional copies of this manual and the documentation enclosed with the machine can
be requested from Corghi, specifying the machine type and serial number.
WARNING: The design details are subject to change. Some illustrations may be slightly
different than the machine in your possession.
FOR YOUR SAFETY
The following paragraphs define the levels of danger regarding the machine, associated
with the warning captions found in this manual:
DANGER: Immediate hazards that could cause serious injury or death.
DANGER: Indicates an imminent situation of danger that, if not avoided,
could lead to serious injury or death.
DANGER