7
FIG.4 Connector diagram
FIG. 3 Grounding protection diagram
Sensor output
Label for sensor output
Label for PZT drive
PZT drive output
4.Mounting the load and tighten it properly to ensure the positioning accuracy.
5.Connect the connector with the corresponding controller according to the identification.
The wiring mode of LEMO connector is shown as below
Safety washer
Flat washer
Platform
Cable
connector
Ground protection
Screw
5.2 Load
When mounting the load, ensure that the load quality is less than the maximum load
capacity of N62, and try to mount the load in the center of the moving surface.
The correct position to mount the load is shown below.
