User and Maintenance Manual
“E” Failsafe caliper brake
Model E4N-ID
Date: 2013/07/01
Revision: 1
www.coremo.it
Page
8
of
14
Figure 2
6.
Adjust the brake shoes using the grub screw C61559 rotating it in the appropriate direction
with a n. 4 Allen key; the friction surface of the brake linings must be parallel to the surface
of the disc (Figure 3).
Figure 3
7.
Connect the thruster piston of the brake to the power line using a 1/4” gas fitting and a flexible
hose of sufficient length to allow the thruster a wide range of movement.
8.
The control pressure must not exceed 100 bar while the minimum opening pressure must not
be less than 60 bar.
9.
Power up the thruster and substitute the safety screw TE M14 with the silencer C61846 (Figure
4).
