Core Products ELT-2701, Instruction Manual

Page: 18 / 61

18
19
Troubleshooting
Problem Cause Solution
The REMOTE and/or RECEIVER
do(es) not seem to be charging Charging cable not plugged in
fully. Ensure the USB cable is firmly
in the REMOTE/RECEIVER and
other end is in the AC Adapter
or Computer USB Port. Check if
there is a problem with the AC
adapter by plugging the USB
Cable into a computer port.
When pressing MODE (M) or
adjusting intensity, nothing hap-
pens. The RECEIVER is not turned on. Make sure both the REMOTE and
RECEIVER(s) are turned on and
that the “c” number matches the
number on the RECEIVER.
The REMOTE can not control the
RECEIVER well. There is no electrical signal trans-
mission between them. Make sure the distance between
the REMOTE and RECEIVER is
less than 10 meters.