Page 10
110-3672
110-4117
716-0105
110-4099
Fig. 9
7.
Carefully stand the rower upright so that it rests on the beam cap and front stabilizer, then install the
pedal spacer (716-0105) between the foot rests. Secure it using one (1) piece each of the M8 x 110mm
socket head cap screw (110-4099) and M8 nylock nut (110-3672), and two (2) pieces of the M8 thick
washer (110-4117).
CAUTION:
Be careful as the seat on the back half of the rower can move freely during this step.
