background image

Page 1

0.6m (23.6 in)

2.0m (78.8 in)

0.6m (23.6 in)

2.0m (78.8 in)

Required Clearance 

1. 

Assemble and operate the machine on a solid 
level surface. Position the machine with a 
minimum of 19.7 inches (0.5 meters) of clearance 
on each side to allow for ease of mounting and 
dismounting. Allow for recommended minimum 
of 19.7 inches (0.5 meters) of clearance in front 
and behind the machine. 

The actual area for access and passage shall be 
the responsibility of the facility and should take 
into account this training envelope, Americans 
with Disabilities Act Accessibility Guidelines 
(ADAAG) requirements and any required local 
codes or regulations (www.access-board.gov/
ada).

2. 

Do not exceed the maximum allowable weight 
limit of 450 lbs. / 204 kg.

3. 

This equipment it is not suitable for therapeutic 
use.

4. 

Care should be used when mounting or 
dismounting the equipment. Before mounting or 
dismounting, move the pedal on the mounting or 
dismounting side to its lowest position and bring 
the machine to a complete stop.

5. 

If the power supply cord is damaged, it must be 
replaced by the manufacturer, its service agent, 
or similarly qualifi ed persons in order to avoid 
hazard.

6. 

The safety and integrity of this machine can only 
be maintained when the equipment is regularly 
examined for damage and wear and repaired. 
It is the sole responsibility of the owner of this 
equipment to ensure that regular maintenance 
is performed. Worn or damaged parts must be 
replaced immediately or the equipment removed 
from service until the repair is made.

7. 

Caution: unit is heavy and requires two people for 
assembly.

8. 

After assembly, a complete visual inspection, 
and test of the features and functions of the 
assembled bike must be made prior to use.

9. 

For complete instructions refer to the owner’s 
manual.

IMPORTANT SAFETY INSTRUCTIONS

Before using this product, it is essential to read the ENTIRE Owner’s Manual and ALL installation 
instructions. The Owner’s Manual describes equipment setup and instructs members on how to use 
correctly and safely.

Read all warnings posted on the machine.

Health related injuries may result from incorrect or excessive use of exercise equipment. STAR TRAC 
strongly recommends you to encourage your members to discuss their health program or fi tness 
regimen with a health care professional, especially if you or they have not exercised for several years, 
are over 35, or have known health conditions.

WARNING!

Summary of Contents for 9-3180-4UB-10IN












Reviews: