INTRODUCTION
Thank you for choosing this wine cooler. The product is designed to meet the most
stringent quality, performance, and safety requirements. This guide aims to improve
your understanding and appreciation of your new wine cooler by providing simple
and informative instructions.
This appliance is intended to be used exclusively for the storage of wine.
This instruction manual is a universal version for a range of models. Please read the
sections carefully, and keep the manual for reference.
HANDLING
Before continuing any further with the installation of this wine cooler please read the
following:
• When lifting always keep your back straight. Bend your legs and not your back.
• Avoid twisting at the waist. It is better to reposition your feet.
• Avoid upper body / top heavy bending. Always bend from the knees rather
than the waist.
• Do not lean forward or sideways whilst handling the wine cooler
• Always grip with the palm of the hand. Do not use the tips of fingers for support.
• Always keep the product as close to the body as possible. This will prevent
unnecessary and undue strain on the body.
• Use gloves to provide additional grip.
• Always use assistance if required
• Never tilt the wine cooler at an angle greater than 45 degrees when moving
• Allow a 10 minute minimum interval between transit and connecting the
wine cooler to a power source
UNPACKING
The unit is supplied in a single packaged carton. Carefully unpack the product using
the following procedure:
• Carefully lift the parts out of the box
• Carefully remove the protective wrapping from the parts
• Carefully remove the wine cooler from its box and put aside
0 5
SECTION 01
