DC8200 Regular Arm Installation Instructions
Mark Door and Jamb
(for QUIK-INSTALL® bracket and arm bracket)
If top rail is 3 (76) or greater, use the template for the
BRACKET provided.
If top rail is 1-3/4 (45) to 2-15/16 (75), use DROP PLATE (754F20) DIMENSIONS denoted by
.
QUIK-INSTALL
"
"
Template
Mount
Bracket
QUIK-INSTALL
Mount Closer Body to
Bracket
QUIK-INSTALL
Drill thru 9/32 (7) Enlarge
to 3/8 (10) Dia. This Side
Only (4 Places)
80-9380-8000-152
Rev. 03/06
80-9380-8000-152
Rev. 09/06
2-1/4
(57)
*10-5/8
(270)
C
L
HINGE OR
PIVOT
*5-5/8
(143)
FRAME LINE
ARM BRACKET
QUIK-INSTALL
BRACKET
754F18
TOP OF DOOR
10
(254)
1
(25)
3/4
(19)
1/2
(13)
Regular Arm
MOUNTING SCREW SPECIFICATIONS
ARM AND CLOSER BRACKET
}
or
{
Sex nuts, furnished
when ordered
#12-14 self-drilling screw
Type BSD. 1/8 (3) diameter
pilot hole required for Wood
Applications.
To obtain extra closing force add 3 (76) to dimensions marked.
This will limit degree of door opening to 110°.
"
*
L
3/8
(10)
1/4-20 THREAD
#12-24 x 5/8 FHMS (4)
#12-24 x 5/8 FHMS (4)
*5-1/4
(133)
3
(76)
4-3/4
(121)
3
(76)
1-5/8
(41)
3/8
(10)
A
C
B
2
NOTES:
Check hand of door, see page
.
Right Hand Application Shown. Left Hand Opposite.
Dimensions given in inches (mm). Do Not Scale Drawing.
Closer must be installed in a true horizontal plane to ensure proper closer performance.
Door opening (up to 180°) is dependent upon door, frame, wall and hinge/pivot conditions permitting.
Minimum clearance required over door:
Non-Hold Open: 1-1/2 (39)
Hold Open: 1-11/16 (43)
1
A
C
B
F
E
G
D
This P a g e
Next Page ( 3 )
3
DROP PLATE
Mounting Holes (4)
754F20
DOOR
THICKNESS
SEX NUT
LENGTH “L”
1-3/8 (35)
1-3/4 (44)
& OVER
1-9/32 (33)
1-21/32 (42)
Start the four mounting screws into the four closer mounting holes.
Place the closer onto the
bracket with the four
mounting screws inserted into the four
bracket slots.
QUIK-INSTALL
QUIK-INSTALL
Tighten the four mounting screws to fasten the closer body to the
bracket.
QUIK-INSTALL
#12-14 X 1-1/2 FH SELF-DRILLING (4)
OR
1/4-20 X 3/4 FHMS W/ SEX NUTS (4)
#12-14 X 1-1/2 FH SELF-DRILLING (4)
OR
1/4-20 X 3/4 FHMS W/ SEX NUTS (4)
