ElectroLynx® is a registered trademark of ASSA ABLOY Inc.
Copyright © 2014 Corbin Russwin, Inc. All rights reserved.
Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
®
ASSA ABLOY
14
6) Operational Check
Lock operational check for devices with cylinders:
1. Insert key into cylinder and rotate. (There should be no friction against lock case, wire
harness or any other obstructions. Refer to Section 4, Step 5 if friction exists.)
2. The key will retract the latch, key should rotate freely. If the deadbolt is thrown, the key will
first retract the deadbolt and then the latch. Inside lever retracts latch and deadbolt, if
provided.
3. Enter 1234 to unlock outside lever handle allowing the lever to retract latch and deadbolt, if
provided.
4. If lock is Prox only (M802) or RF Technology with Prox (M805) - refer to keypad
programming instructions (FM 224) to program lock using Accessware software.
C A U T I O N
DOOR MUST REMAIN OPEN
DURING INSTALLATION.
USE DOOR STOP.
TEST
FOR PROPER
OPERATION
BEFORE
CLOSING
DOOR
®
AS
SA
AB
LO
Y
