Cor Level Table, Assembly Instructions Manual

Page: 34 / 65

3 6
GB
S A F E T Y I N S T R U C T I O N S
Do not sit on the table top.
At least two people should transport your Level
table in order to avoid damage to the furniture
and floor. Do not push or pull the furniture, but
lift it carefully.
Adjusting the height setting of the assembled
Level table requires at least three people.
The height setting is suitable for a range of
70-78 cm. Do not extend the height setting
above 78 cm, otherwise the rail will not provide
enough support.
S A F E T Y I N S T R U C T I O N S
Read these operating instructions carefully in
order to acquire a thorough knowledge of the
Level Table electric and its operation.
To avoid injury and damage to the table, opera-
te the table in the correct manner in accordan-
ce with these instructions.
Keep the operating instructions readily to hand
and consult them if you have any doubts about
carrying out any procedure.
The operating instructions, as well as spare
parts lists and documentation from sub-sup-
pliers, are a separate part of the overall docu-
mentation. The complete documentation must
be made available to the operat-ing, cleaning
and maintenance personnel.
Level
Level electric
Manufacturer‘s address
COR Sitzmöbel
Helmut Lübke GmbH & Co. KG
Nonenstraße 12
33378 Rheda-Wiedenbrück, Germany
Operating instructions
© 2019 COR Sitzmöbel Helmut Lübke GmbH
& Co. KG
Copyright of the operating instructions
COR Sitzmöbel Helmut Lübke GmbH & Co.
KG retains the copyright to these operating
instructions.
These operating instructions are intended for
the operating personnel. They con-tain techni-
cal instructions and drawings which may not be
reproduced, distributed, used for competitive
purposes without authorisation or communica-
ted to others, either in whole or in part.