Z-Wave WakeUp
A controller can only communicate with the qheat RS when it is awake.
The intervals when the qheat RS is awake can be set using the WakeUp
Command Class. By default the WakeUp interval is 60 minutes. The
qheat RS can be woken manually by pushing any of the three buttons,
and will stay awake for 10 seconds.
Z-Wave Node Information Frame
Each time the LED button is pressed the qheat RS will and send NIF.
This is also true when the qheat RS is in tamper-proof mode.
Factory Reset
1. Remove one of the
batteries.
2. Press and hold the LED button while re-
inserting the battery until the LED flashes
red (approx. 5 seconds). The qheat RS is
now reset to factory defaults.
GB
qheat
DTHERMZ5 10/2015
13
Installation & User Guide qheat room sensor
