COPYTRAX TECHNOLOGIES MONET 5000 Pro & Pro-Recorder
May 2005
www.copytrax.com
35
50 50
40 40
30 30
30 30
40 40
50 50
50 40 30
50 40 30
30 40 50
30 40 50
Decrease
Top Margin
verringern
Increase
Top Margin
vergrößern
Increase
Left Margin
vergrößern
Decrease
Left Margin
verringern
100 Steps = 1 mm
100 Schritte = 1mm
This group of functions allows the calibrating of the
printer.
Pressing the button „Print Calibration File“
generates a special print image, which will be used
to calibrate and centre the printout.
These print image shows the values
how much the printing is away from
the centre of the printer tray.
A distance from 1 mm equals a
value of 100 steps.
Put the values into the „
Left Margin
“ and „
Right Margin
“ fields and save them by
pressing the „Save Margins“ button.
In this area is shown the ink level
and the life time of the cartridges.
Note:
The ink level is calculated by the driver and depends on the print image,
print mode and quality.
This calculated value is stored inside the printer memory.
The actual ink level inside the cartridge may vary from this calculated
value.
