R e l i a b l i t y
C S - 2 5 4 0 / C S - 3 0 4 0 P R O D U C T G U I D E
43
Long Life Technology
The CS-3060 and the CS-2560 like all of the
Copystar’s products incorporates the long life
consumables, industry leading yields, and
preventive maintenance making the CS-3060
and the CS-2560 a real benefit for the small to
mid-size business.
Drum
The CS-3060 and the CS-2560 utilize
Copystar’s Amorphous Silicon (ASi) Drum for
imaging. By including the ASi Drum, Copystar
can manufacture products that have higher
drum yields when compared to other
manufactures’ products in the same segment.
Monocomponent Toner
The CS-3060 and the CS-2560 are
Monocomponent products so no developer
needs to be added between Preventive
Maintenance schedules, as is the case with
some of the competitive dual component
models. Monocomponent Technology is
beneficial to the customer, since the image
printed on the page does not degrade over time
with developer depletion during normal imaging.
Customers with the new CS-3060 and the
CS-2560 only need to replace toner when
required, simplifying the interaction with these
MFP’s. Toner replacement is a straightforward
process, with the sealed toner container
accessed from the front. The toner container
slides easily into the space just above the
engine quickly and without any mess.
The Toner Container for the CS-3060 and the
CS-2560 is exclusive for the MFPs and cannot
be interchanged with printer toner. The rated
yield for the toner used by the CS-3060 and
the CS-2560 is 20,000 impressions based on
a 6% fill ratio.
The TK-677 Toner Container will have an
embedded Radio Frequency Identification
(RFID) chip to ensure that customer’s use the
proper toner for these products.
Preventive Maintenance
Preventive Maintenance or PM is the interval
determined for the Maintenance Kit
replacements, and is set to identify when these
replacement are necessary to ensure the MFP
is working up to manufacturer specifications.
During the PM for the CS-3060 and the
CS-2560, the only item that is replaced is the
maintenance kit, which consists of the drum
assembly, developer assembly, fixing unit,
transfer assembly and miscellaneous feed
rollers. By providing all of the required parts in
one kit, Service Technicians can perform a PM
very quickly, with the whole process taking
between 20 to 30 minutes. Customers
requiring a PM at the appropriate intervals will
be up and running quickly, minimizing
downtime.
Model
Output Speed
ASi Rated Yield
KM-3060
30 PPM
300,000
KM-2560
25 PPM
300,000
