CopyPro CD-R 3500 Operating MODES
CopyPro
CD-R 3500
17
Once the rebooting is done you will get the power-on startup message on
the LCD display as described in
Starting the System.
The system is now
ready with the new firmware.
Warning:
Once you have started to download the firmware from the Host
computer, the operation should not be interrupted.
Verify Enable Mode
Selecting Verify Enable Mode allows you the option to verify each CD, which
has been recorded. By default, the CD-R 3500 does not verify each recorded CD.
Simulate Write Mode
The Simulate Write mode disables the laser in the CD-ROM drive. This mode
allows test writing. Blank CD’s will not be written to, but the writing process is
simulated in full.
Speed Setting
The Speed Setting mode allows you to manually choose the read and write speeds
the CD-R drive will use. By default, the CD-R is set to use the maximum read
and write speeds.
Recording method
The Recording methods supported by the CD-R 3500 are
Disc At Once
and
Track At Once
. By default, Disc At Once recording is selected.
Note: Disc At Once is only supported by TEAC CD-R drives.
When you have selected the appropriate modes for your duplication job, press the ‘Menu’
button to return to
Duplicate MODE
and press ‘
Enter
’.
