CopperOptics 150-1365-04, Manual

Page: 26 / 38

Revision 04 February 19, 1998 363-765-104-04
22 PairGain Engineering - Plant Series FRE-765 List 4x
Subscriber Lines. To install the subscriber lines, follow the instructions for the appropriate FRE-765
enclosure.
To install subscriber lines for List 4A and 4H FRE-765 enclosures do the following:
1 Route the subscriber line cables through the bottom of the enclosure.
2 Terminate the cables per Table 13 or Table 14 .
3 Secure with a cable tie to the bracket near the cable entrance.
)
* For the FRE-765 List 4A RT Enclosure, the cable on the rear of the AMP Quiet Front
termination module is installed in connector P1 on the RT enclosure backplane.
† Shaded terminations used only with the 8 Channel POTS or 4 Channel DDS Units.
Table 13. Subscriber Terminations for List 4A
* †
Channel
Unit
Circuit
Subscriber Protector
Connector Pair Strip Socket
1 TB1 1 PB1 1
2 TB1 2 PB1 2
3 TB1 3 PB1 3
1 4 TB1 4 PB1 4
5 TB1 5 PB1 5
6 TB1 6 PB1 6
7 TB1 7 PB1 7
8 TB1 8 PB1 8
1 TB1 9 PB1 9
2 TB1 10 PB1 10
3 TB1 11 PB2 1
2 4 TB1 12 PB2 2
5 TB2 1 PB2 3
6 TB2 2 PB2 4
7 TB2 3 PB2 5
8 TB2 4 PB2 6
1 TB2 5 PB2 7
2 TB2 6 PB2 8
3 TB2 7 PB2 9
3 4 TB2 8 PB2 10
5 TB2 9 PB3 1
6 TB2 10 PB3 2
7 TB2 11 PB3 3
8 TB2 12 PB3 4