FTT-UV - Revision A - Released September 25, 2020 - Copernicus Educational Products Inc.
11
UV Tech Tub® Cleaning Tips
Ensure that the UV Tech Tub® is turned off and unplugged from wall
receptacle before cleaning.
Clean the exterior and interior of the UV Tech Tub® with a cloth dampened
with a small amount of water.
Do not use any solvent to clean the equipment.
Stubborn stains may be removed with a cloth slightly moistened with a
solution of mild soap and warm water.
Dry with a clean, non-abrasive cloth. Allow time to dry before plugging in
and turning back on.
Window Cleaning Tips
Clean the tempered glass surface with a soft cloth dampened with a small
solution of mild soap and warm water.
Do not use any solvent to clean the equipment.
Take a sponge or soft cloth and use it to remove the soap-water mixture.
Dry with a new, clean non-abrasive cloth and wipe the glass dry.
Disinfecting the UV Tech Tub®
The UV Tech Tub® features several touchpoints that require frequent
disinfection.
Remember to clean and disinfect the latch knob (A), the cycle start button
(B), the flip-up handle (C), and the two handles on the door and back (D, E).
It is important to disinfect these high touch areas to avoid decontaminating
disinfected items.
UV Testing Card Storage
Keep and store your unused UV testing cards in the provided resealable bag.
This bag must be stored inside of the top compartment (F) and out of
daylight until use.
Ensure that the top compartment door is closed when not in use.
Window cleaning
Clean and disinfect these areas
Clean and disinfect these areas
(E)
(C)
(B)
(D)
(A)
Store UV testing cards in top compartment
(F)
FTT-UV
Maintenance and Care Instructions
