background image

FTT-UV - Revision A - Released September 25, 2020 - Copernicus Educational Products Inc.

6

FTT-UV

Before beginning, you should have:

Contents

UV Tech Tub

1x

Power Cord

1x

25527

Keys

2x

430446

Dosimeter Test Cards

12x

26100

Watch for This Helpful Symbol

Assembly Instructions

Watch for this symbol throughout this user manual. 
Wherever you see it, pay close attention to ensure it is 
done correctly.

Before You Begin

As You Assemble the Unit

Lay out and identify all of the included parts. 

Read the assembly guide over once to familiarize yourself 
with them.

Please note that in its unassembled state, this product 
contains parts that can be hazardous to small children. 
This product should be assembled by an adult.

Follow the steps in sequence.

Before beginning each step, find the part(s) that you 
need for that step.

Pay attention to the labels on the parts; they are there to 
help direct you at certain stages.

The title of each step states what you will be doing. 
Review the text and the pictures as you build the unit.

Customer Service

For missing parts and other issues regarding your 
product, please contact Customer Service, where we will 
be happy to help.

1-800-267-8494. Monday - Friday 8:00am - 4:30 pm EST.

OR

Email at [email protected]

Need Tech Support?

Have a Question?

Email our Tech Support Service

www.copernicused.com

Check out some of our

other great products!

Summary of Contents for UV Tech Tub














Reviews: