30
USER'S MANUAL
Operating Machine In Selected Modes
Transmission Procedure
When each button on the remote controller is pressed with the remote controller
pointing toward the air conditioner unit, signal is sent. When the signal is received
correctly, the receiving sound is emitted from the unit.
1. Point the remote controller at the unit,press the ON/OFF button,then press
the MODE button,select the needed mode: ATUO,COOL,DRY,HEAT(FAN),or FAN.
2. Press the SET TEMPERATURE button to increase or decrease the readings
until the needed temperaure is displayed.The room set temperature range is
from 16˚C-32˚C. (It would be automatically set at 25˚C and unadjustable in
AUTO and DRY mode.)
3. Press the FAN SPEED button to choose the air rate you want: Low (display
indicates " "), Med (display indicates " "), Hi (display indicates " "), Auto
(display " " indicator flashing).
(It would be automatically set at low speed and unadjustable in DRY mode.)
4. Press the SWING button to choose the up/down air flow direction you want:
natural flow (display indicates " "), swing (display " " indicator flashing), fixed
wind (display indicates " "). Press the AIR FLOW button to choose. the left/right
air flow direction you want:swing or fixed wind. (It would be automatically set at
fixed wind air flow direction in DRY mode.)
Attention:Please do not adjust the guide blades of air outlet by hand directly,or
which can damage the parts of the machine.
