17
Network Camera User Manual
Day/night Mode
: Please choose the mode as needed.
Sensitivity
: High, middle and low can be selected.
Infrared Mode
: You may choose “ON”, “OFF” and “Auto” as required.
Exposure Mode
: You may choose “Auto” or “Manual” as required.
4.2.2
Video / Audio Configuration
Go to Image
Video / Audio interface as shown below. In this interface, you can set the
resolution, frame rate, bitrate type, video quality and so on subject to the actual network
condition.
Click “Audio” tab to go to the interface as shown below.
You can select streams for different channels.
IP Channel 1: Fisheye view channel, 3 streams can be set. Please set them according to the
actual network condition.
IP Channel 2: Panoramic view channel, 2 streams can be set. Please set them according to the
actual network condition.
IP Channel 3/4/5: PTZ view channel, 2 streams can be set for each channel. Please set them
according to the actual network condition.
Resolution
: The higher the resolution is, the clearer the image is.
Frame rate
: The higher the frame rate is, the more fluent the video is. However, more storage
room will be taken up.
Bitrate type
: Including CBR and VBR. CBR means that no matter how changeable the video
resources are, the compression bitrate keeps constant. This will not only facilitate the image
quality better in a constant bitrate but also help to calculate the capacity of the recording.
VBR means that the compression bitrate can be adjustable according to the change of the
video resources. This will help to optimize the network bandwidth.
Bitrate
: Please choose it according to the actual network situation.
Video Quality
: When VBR is selected, you need to choose image quality. The higher the
