MAXDVR & DR
Series
Cards
52
Relative Definitions:
[Port]: users can set serial port number
[Protocol]: P.T.Z device communication protocol
[Address]: P.T.Z device communication address
Serial ports setup
Users should firstly enable the P.T.Z control function of a certain camera
and select a port number in P.T.Z Protocol Setup (refer to Fig4.22), and then
set corresponding parameters in the area below:
Fig4.22 P.T.Z serial port setup
Relative explain:
[Port]: users can set port number
[Baud Rate]: set P.T.Z device Baud Rate, default value is 9600
[Data bits]: default value is 8
[Parity]: odd and even parity bit, default Null
[Stop Bits]: default value is 1
Notice:
Users should look into the P.T.Z device and get the Baud Rate,
Summary of Contents for DR3004F
Page 24: ...MAXDVR DR Series Cards 24 Fig2 9 Welcome page Select Next Fig2 10 Select video format ...
Page 72: ...MAXDVR DR Series Cards 72 Fig6 17 Example original size ...
Page 97: ...MAXDVR DR Series Cards 97 Figure7 42 Connecting to the server Figure7 43 Log on successfully ...
Page 114: ...MAXDVR DR Series Cards 114 ...