13
Test whether connected
After setup IP address, click left bottom of PC: Start--all program--attachment”,open”Command Prompt”,use PING command to test whether PC has
connected with IP camera.
Command as: Ping 192.168.1 .8
If screen show“Request timed out.”or” destination host unreachable”,it means install not OK.Pleae check below:
Hardware connect correct or not
PC’s TCP/IP set Full-Mesh as IP camera or not.
Whether network forbit PING command or not,please ask network manager.
2.3 Log in the network
This chapter introduce how to access IP camera through web browser. This manual’s interface are under Windows XP and IE8.
