8
Make all the 485 Buss connections in a “daisy chain” configuration as shown.
Power up the domes and the DVR.
Establish the protocol and Baud rate being used by the system RS485 Buss to control
the speed domes. (see 485/232 details in the System Settings menu of the DVR).
Set the protocol and baud rate of the keyboard to be the same as rest of the system
using the Dil switches on the rear of the Keyboard (refer to page 4 for settings).
Set the PTZ ID’s of each dome camera connected. (refer to Camera setting: PTZ in the
Engineer Manual). Each camera must have a unique ID.
e.g. Camera 1: PTZ ID 001, Camera 2: PTZ ID 002 etc.
If the Keyboard is to be used to control and operate the Symphony DVR, assign the
DVR with a unique ID. e.g. ID 101 (see page 5).
Switch on the power to the Keyboard.
Current CamID:001
PELCO_D 2400bps
Display:
The Keyboard can now be used to operate the PTZ features of the connected speed
domes. (see page 19 for details).
Press the Function button F3 and the operating Mode of the keyboard will change to
provide Symphony DVR control. (see page 12 for details)
The Keyboard will initialise then default to providing PTZ control.
Addr: 00001
* DVR-SHE *
Display:
Summary of Contents for Symphony
Page 1: ...1 SYMPHONY KEYBOARD ...