manualshive.com logo in svg

COP Security Symphony, User Manual, Page: 22 / 24

Share
Download
COP Security Symphony User Manual Download Page 22

22

   Call Number :001

PELCO_D 2400bps

Press the CALL button, the LCD will ask 
you to input the number for the preset 
required.

The Dome will move and display the preset image called for. 

A confirmation message will be displayed on screen when using COP dome cameras. 

Use the number keypad to input the ID 
then Press ENTER

      Preset No. :006

PELCO_D 2400bps

Shot

The tour sequence programmed  into the Speed Dome can be selected to display. 

Display the camera you wish view. 

Current CamID:009

PELCO_D 2400bps

    Input CamID:001

PELCO_D 2400bps

Use the number keypad to input the ID 
then Press ENTER

Press the CAM/ID button - the LCD will 

ask you to Input the Camera ID.

     Input Tour No.:1

PELCO_D 2400bps

Press the SHOT button, the LCD will 
ask you to input the number for the tour 
required.

The Dome will move and display the preset image called for. 

A confirmation message will be displayed on screen when using COP dome cameras. 

Use the number keypad to input the ID 
then Press ENTER

    Input Tour No. :2

PELCO_D 2400bps

Summary of Contents for Symphony

























Reviews:

No comments