6. MOTION SETUP
Your DVR has built-in video motion detection function. Motion detection Enable/ Disable,
motion area can be selected separately for each camera. When your DVR detects
motion, it begin to record multiplexed video signals from the camera or cameras which
motion is detected and display only the camera with motion during 30 seconds.
Recoding duration can be selected in MOTION SETUP menu. To access MOTION
SETUP, press
ENTER
when MOTION SETUP in MAIN MENU using
DOWN
or
UP
button is highlighted with blue color. The menu above will appear on monitor.
1) SENSITIVITY:
5 steps (very low, low , normal, high, very high)
Your DVR support 5 sensitivity levels. It can be selected using
LEFT
or
RIGHT
button.
2) FRAME RATE:
Your DVR support 60, 30, 15, 10, 5, 1, 0.5 IPS for NTSC. 50, 25,16, 10, 5, 1, 0.5 IPS
for PAL. It can be selected using
LEFT
or
RIGHT
button.
3) DURATION:
It define recording duration after motion is detected. This DVR support 10 sec, 30sec,
1,2,3,4,5,6,7,8,9,10,20,30,40,50,60 minutes. It can be selected using
LEFT
or
RIGHT
button.
: DISABLE
BUZZER ALERT
5
: DISABLE, ALL, SETUP
: DISABLE, 1 to 4
: CH1 – CH16
: 1 MIN
: 60/ IPS
: Normal
SENSITIVITY
1
AREA SETTING
TRIGGER OUT
CAM NUM
4
DURATION
3
FRAME RATE
2
MOTION SETUP
▲ ▼
◀ ▶
EXIT
ENTER
5
PDF created with pdfFactory trial version
www.pdffactory.com
