ASSEMBLY
1.
Fix the left and right rear axle braces (7 & 8)
to the rear axle support (6) using bolts (26),
washers (21) and locking nuts (22) to form
the rear axle. Attach the assembled rear axle
to the trolley base (1) using bolts (26),
washers (21) and locking nuts (22) – see left.
2.
Attach the yoke (11) to the front axle support
(9) using the pre-attached 10mm washer
(and cotter pin. Attach the centre front axle brace (10) to the yoke (11) using 8x20mm
shoulder bolt (31), 6mm washer (29) and 6mm locking nut (30). Attach the yoke (11) to
the steering link connector (12) using 1x 8x15mm shoulder bolt (28), 6mm washer (29)
and 6mm locking nut (30).
Insert the remaining 2x
8x15mm shoulder bolts (28)
into the ends of the steering
link connector (12) and
secure using 6mm washer
(29) and 6mm locking nut
(30) – see right.
