3.
Attach the front axle support (9) to
the trolley base (10) using 8x20mm
carriage support bolts (260,
washers (21) and locking nuts (22) –
see left.
4.
Attach the wheels by fitting the wheel
spacers (23) onto the axles before
attaching the wheels (5) ensuring the
valve stems are facing outwards.
Secure using 12mm wheel washers (25)
and 12mm wheel locking nuts (24) –
see right.
5.
Attach the handle to the yoke (11) and
the plastic coupling (13) using 8X60mm
handle bolt (27), washer (21) and
locking nut (22). Attach the handle (14
or trailer hitch (15)using the handle pin
(18) and clevis pin (19) – see right.
6.
Attach the front panel (3) back panel
(4) and side panels (2) to the trolley
base (1) using the fence pins (8). Use
the locking handles (20) to attach the front and back panels to the side panels. Secure
using locking nuts (22).
7.
Fit the tarpaulin and secure
using the press studs.
