background image

 
 

 

 

Red Comfort Grip Knife Sharpener

    

G675  

Instructions for Use 

 

Please read and retain these instructions for future reference 

v003: 24/02/21 

 

occurs, stop sharpening, use less pressure, and begin again. 

 

 

Care: 

-

 

MAKE  SURE  THE  SHARPENER  IS  UNPLUGGED  BEFORE 
CLEANING 

-

 

The exterior of the Electric Knife Sharpener can be wiped clean 
with a damp cloth. 

-

 

NEVER use abrasive cleansers on any part of the Electric Knife 
Sharpener. 

-

 

NEVER immerse the sharpener in water or any other liquid. 

-

 

To  remove  excess  metal  filings  collected  by  the  magnet, 
periodically  open  the  access  panel  on  the  bottom  of  the 
sharpener, and wipe with a damp cloth. 

 

 
This appliance is fitted with a moulded BS 1363 13-amp plug. If you have to replace the fuse, only those that 
are ASTA or BSI approved to BS1362 and with a rated current of 13-amps should be used.  
 
If there is a fuse cover fitted, this cover must be re-fitted after changing the fuse. If the fuse cover is lost or 
damaged the plug must not be used. Spare fuse holders and fuses are available from electrical outlets. If the 

socket outlets in your home or office are not suitable for this product’s plug, the plu

g must be removed and 

disposed of safely.  
Attempts to insert the plug into the wrong socket is likely to cause electric hazard.  
 

DISPOSAL 

 

Dispose of all packaging, paper, cartons, plastic and plastic bags in accordance with your local recycling 
regulations.  

 

Plastics: This is made from the following plastic. 

 

 

 

Low Density Polyethylene 

ABS 

 

At the end of the product’s lifespan please dispose of it at an authorised household waste recycling 

centre.

 

Summary of Contents for G675

Page 1: ...ECT AGAINST ELECTRIC SHOCK DO NOT IMMERSE CORD PLUG OR APPLIANCE IN WATER OR ANY OTHER LIQUID CLOSE SUPERVISION IS NECESSARY WHEN USING THE ELECTRIC KNIFE SHARPENER NEAR CHILDREN ALWAYS CHECK THAT THE KNIFE SHARPENER IS TURNED OFF BEFORE PLUGGING THE CORD INTO THE OUTLET AND THEN TURN THE KNIFE SHARPENER ON TO DISCONNECT TURN THE KNIFE SHARPENER OFF BEFORE REMOVING THE CORD FROM THE OUTLET UNPLUG ...

Page 2: ...AND THE CONFINES OF THE AREA IN WHICH IT IS SITUATED WE RECOMMEND A MINIMUM CLEARANCE AROUND ALL FACES OF AT LEAST 10CM BEFORE USE CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE FOUND TAKE CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE INTERNAL DAMAGE THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED BY COOPERS OF STORTFORD MAY CAUSE INJURIES AND INVALIDATE ANY WARRAN...

Page 3: ...s it could cause damage to the knife and or sharpener and serious injury HOW TO USE 1 Slowly draw the knife towards you from the heel to the tip of the blade applying light pressure to ensure the blade contacts the sharpening wheel 2 Draw the knife through each stage several times alternating sides Sharpening each side of the blade should take 5 10 seconds per side depending on blade length 3 For ...

Page 4: ...you have to replace the fuse only those that are ASTA or BSI approved to BS1362 and with a rated current of 13 amps should be used If there is a fuse cover fitted this cover must be re fitted after changing the fuse If the fuse cover is lost or damaged the plug must not be used Spare fuse holders and fuses are available from electrical outlets If the socket outlets in your home or office are not s...

Reviews: