background image

WARNING

• Before use, check that the mains voltage shown on the

appliance matches that in your home.

• Check all parts, including the power cable for damage before

use.  Do not use if any part is damaged in any way.

• Do not allow the power cord to hang over the edge of the work

surface or to touch hot surfaces.

• Keep away from heat sources and naked flames.
• Do not touch the surface of the appliance during use as it may

become hot, apart from the handles and knobs.

• Do not allow children to play with or near the appliance.
• Use only one function of the appliance at a time.
• For indoor, domestic use only.
• Do not touch the cutting blades.
• Do not insert any objects into the jugs while in use.  A spatula

may be used when not in use.

• Do not run the appliance when the jug is empty. 
• Do not attempt to remove the jug cover until the blades have

stopped moving.

• Use only for the intended use as described in this manual.
• This appliance should only be used by persons (including

children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, providing they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety. 

• The appliance is not intended to be operated by means of an

external timer or separate remote-control system. 

TROUBLESHOOTING

No function:

• Check the appliance is plugged in to the mains and the mains

socket is switched on.

• Check that all 3 alignment points are correctly located. If any

of the 3 points are incorrectly located, the safety feature will
cut power to the appliances.

CLEANING

• Always switch off the appliance at the mains and unplug before

cleaning.

• After use, disconnect the accessories that require cleaning and

wash them in warm, soapy water.  Dry thoroughly before
replacing or storing.

• Wipe the base clean with a soft damp cloth and dry

immediately.

• Wipe any food from the power cord.
• Do not use abrasive scourers or abrasive cleaning agents.
• Never immerse the base in water or any other liquid.

DISPOSAL

• Dispose of all paper, cartons, spent batteries and plastic in

accordance with your local recycling regulations. At the end of the
product’s lifespan please dispose of it at an authorised household
waste recycling centre.

DECLARATION OF CONFORMITY

We, The Enterprise Department Ltd.
of 11 Bridge Street, Bishop’s Stortford, Hertfordshire, UK. CM23 2JU
in accordance with the following Directive(s):

Electromagnetic Compatibility 2004/108/EC

EN 55014-1: 2006+A1
EN 55014-2: 1997+A1+A2
EN 61000-3-2: 2006+A1+A2

EN 61000-3-3: 2008

Low Voltage Directive 2006/95/EC

EN 62233:2008
EN 60335-1:2002+A11+A1+A12+A2+A13+A14+A15
EN 60335-2-14:2006+A1
ZEK 01.4-08/11.11

Hereby declare that:
Food Processor & Blender
Model number: 9635 (W-809A)

I hereby declare that the equipment named above has been
designed to comply with the relevant sections of the above
referenced specifications. The unit complies with all applicable
Essential Requirements of the Directives.
Mr. Stuart Fowler
Imports Director
August 2013

Summary of Contents for 9635

Page 1: ...d grinder Secure by twisting anti clockwise Ensure alignment arrows are in line before use 1 2 6 7 8 9 10 11 12 13 14 15 16 17 3 4 5 ASSEMBLY Before use wash all parts that come into contact with food thoroughly TO ASSEMBLE THE BLENDER Attach the blender jug cover 2 to the blender jug 3 and push down the jug cover to secure Fit the cap 1 into the blender jug cover 2 and twist clockwise to secure A...

Page 2: ...r Attach the processor jug 9 to the shorter side of the base Place the assembled rotor section over the column in the centre of the processor jug as diagram 1 Attach the processor jug cover 8 to the processor jug and twist anti clockwise to secure ensuring the long plastic catch fits into the recess on the taller side of the base Push food into the processor using the push cover 7 as diagram 2 Dia...

Page 3: ...e reversible blade 10 onto the rotor with the slicing blade lowermost and twist clockwise to secure as diagram 4 To further chop the food add the stainless steel blade 11 to the rotor Once the food is processed lift out the jug USING THE BLENDER Remove the blender jug cover by twisting the cover anti clockwise Place food into the blender jug and replace the blender jug cover twisting it clockwise ...

Page 4: ...ket is switched on Check that all 3 alignment points are correctly located If any of the 3 points are incorrectly located the safety feature will cut power to the appliances CLEANING Always switch off the appliance at the mains and unplug before cleaning After use disconnect the accessories that require cleaning and wash them in warm soapy water Dry thoroughly before replacing or storing Wipe the ...

Reviews: