Petrol Brush Cutter
10596
Instructions for Use
Please read and retain these instructions for future reference
v001: 18/10/16
Page No. 7
3.
Never transport the brush cutter over rough roads over long distances without first removing all
fuel from the fuel tank, as doing so might cause fuel to leak from the tank.
OPERATION SAFETY PRECAUTIONS
1.
Grip the handles of the brush cutter firmly with both hands. If you need to suspend work,
place the throttle into the idling position.
2.
Always be sure to maintain a steady, even posture while working.
3.
Maintain the speed of the engine at the level required to perform
cutting work, and never raise the speed of the engine above the level necessary.
4.
If the grass gets caught in the blade during operation, of if you need to check the unit or
refuel the tank, always be sure to turn off the engine.
5.
If the blade touches a hard object like a stone, immediately stop the engine and check if
something is wrong with the blade. If so, replace the blade by a new one.
6.
If someone calls out while working, always be sure to turn off the engine before turning
around.
7.
Never touch the spark plug or cord while the engine is in operation. Doing so may result in
being subjected to an electrical shock.
8.
Never touch the muffler, spark plug, or other metallic parts of the engine while the engine is
in operation or immediately after shutting down the engine. Doing so may result in serious
burns.
9.
When you finish cutting in one location and wish to continue in another spot, turn off the
engine and turn the unit so the blade faces away from your body.
MAINTENANCE SAFETY PRECAUTION
1.
Perform maintenance and checks described in this manual at regular intervals. If any parts
must be replaced or any maintenance or repair work not described in this manual must be
performed, please contact a representative from the store or nearest authorised servicing
dealer for assistance.
2.
Under no circumstances should you ever take apart the brush cutter or alter it in any way.
Doing so might result in the brush cutter becoming damaged during operation or becoming
unable to operate properly.
3.
Always be sure to turn off the engine before performing any maintenance or checking
procedures.
4.
When sharpening, removing, or reattaching the blade, use proper tools and equipment to
prevent injury.
5.
When replacing blade or any other parts or when replacing the oil or any lubricants, always
be sure to use only products which have been certified for use with the brush cutter.
